Difference between single-stage reducer and two-stage reducer
Now there are various types of reducers on the market. Today, let's talk about the difference between single-stage reducer and two-stage reducer.
Installation method of cycloidal pin gear reducer
The bearing on the upper part of the reducer adopts oil immersion or forced lubrication.
Why does the worm gear reducer generate vibration?
Worm and worm reducers are also made of different materials. The bearing force and weight vary with the material of the reducer housing. The internal parts of the worm gear reducer are all metal castings, so they are relatively heavy. Especially the cast iron worm gear reducer made of cast iron is much heavier than the aluminum alloy worm gear reducer made of aluminum alloy.
Why is the shaft broken when the output of the reducer is too small
In addition to the gear reducer shaft broken due to poor concentricity of the gear reducer output end assembly, if the gear reducer output shaft is broken, the following reasons may be involved.
Precautions for reducer maintenance
Precautions for reducer maintenance 1. Oil level reducer is generally lubricated by oil teeth. Before use, oil must be added to the specified position (as shown in the diagram) and replaced regularly.