Characteristics, working principle and application fields of BWY6-87-15KW planetary cycloidal pinwheel reducer

This article will introduce the characteristics, working principle, application fields, and usage precautions of the BWY6-87-15KW planetary cycloidal pinwheel reducer to you.

1、 Characteristics of BWY6-87-15KW Planetary Cycloidal Pinwheel Reducer

The BWY6-87-15KW planetary cycloidal gear reducer is an efficient and high-performance reducer with the following characteristics:

1. High transmission efficiency: The transmission efficiency of the BWY6-87-15KW planetary cycloidal pinwheel reducer can reach over 90%, with a high energy utilization rate, saving energy costs for enterprises.

2. High torque output: This reducer has a large output torque and can operate normally under high loads, suitable for various heavy-duty machinery and equipment.

3. Good high-speed performance: The BWY6-87-15KW planetary cycloidal pinwheel reducer has good high-speed performance and can adapt to high-speed operating environments.

4. Compact structure: The reducer has a compact structure, small volume, light weight, and is easy to install and maintain.

5. Long service life: The material of the BWY6-87-15KW planetary cycloidal gear reducer is high-quality, and the craftsmanship is exquisite, effectively improving the product's service life.

2、 Working principle of BWY6-87-15KW planetary cycloidal pinwheel reducer

The working principle of the BWY6-87-15KW planetary cycloidal pinwheel reducer is based on the principle of planetary gear transmission, mainly composed of sun gear, planetary gear, and pinwheel. As the input end, the sun gear receives input from an electric motor or other power source, and the planetary gear transmits power to the sun gear through meshing. The needle wheel serves as the output end to output the power after deceleration. During the transmission process, the rotation and revolution of the planetary gears cooperate with each other to achieve the purpose of deceleration.

3、 Application field of BWY6-87-15KW planetary cycloidal pinwheel reducer

The BWY6-87-15KW planetary cycloidal gear reducer is widely used in various heavy-duty machinery and equipment, such as metallurgical machinery, mining machinery, petroleum machinery, chemical machinery, etc. At the same time, this reducer can also be applied to various industrial production lines and automation equipment, providing stable and efficient power output for the production process of enterprises.

4、 Precautions for using the BWY6-87-15KW planetary cycloidal pinwheel reducer

To ensure the normal operation and extend the service life of the BWY6-87-15KW planetary cycloidal gear reducer, users should pay attention to the following points during use:

1. Input voltage and frequency: This reducer is suitable for standard voltage and frequency ranges, and users should ensure that the input power supply is within the specified range during use.

2. Load situation: Users should choose the appropriate reducer model and specification based on the actual load situation to ensure its normal operation under higher loads.

3. Installation environment: The reducer should be installed in a dry, ventilated, and non corrosive gas environment, avoiding direct sunlight and severe vibration.

4. Lubrication and maintenance: Regular lubrication and maintenance of the reducer can effectively improve its service life and operating efficiency. Users should maintain according to the manufacturer's recommended lubrication method and cycle