The difference between the speed changer and the inverter change speed
Helical-gear-worm-gear-reducer-without-motor-r37
Talk about how to maintain and "smooth" the reducer
gear,reductor,motor,speedreducer,Gearbox,Rseries,sew，R17,R27,R37,R57,R67,R77,R87,R97,R107,R127
Talking about the high-speed development trend of reducer
The role of the reducer in modern industry is enormous, and its status is irreplaceable. Let me talk about the start and development trend of the reducer. In the 1970s and 1980s, the world's reducer technology was greatly developed and closely integrated with the development of new technological innovations. The general trend of the general reducer is as follows:
How to make the life of the reducer
How to make the life of the reducer "progressive",Friends who have been in contact with the reducer know that the life of the reducer is determined by the external load size and the internal wear rate.
Analysis of the cause of noise in gear reducer
Noise suppression is a problem that plagues gear reducers. So which factors of the gear reducer will affect the size of the noise? Today we will understand - the factors that affect the noise of the gear reducer. No. - Design. The greater the bending strength, the displacement coefficient, and the meshing coefficient of the teeth, the smaller the noise. Second, work is smooth. The so-called wo
How to care for and clean the gear reducer?
Many mechanical devices have gear reducers that can play an important role. Therefore, everyone needs to properly maintain the gear reducer and make better use of it. However, some people are not very familiar with the common sense of gear reducers. Then let's see how to maintain and clean the gear reducer. What is the role of the gear reducer grease?
Does the new gear reducer require a running-in period when it is used?
1. A newly purchased gear reducer requires a running-in period, and the correct running-in can greatly extend the life of the gear reducer. Before use, the operator should accept the guidance and training of the manufacturer, or read the instruction manual of the gear reduction in detail, understand the structure and performance of the gear reducer, and have certain operation and maintenance exper
Noise measurement of the motor on the reducer
The motor noise measurement on the reducer should be carried out under the no-load stable operation state; for the DC motor, the speed and voltage should be maintained at the rated value when measuring; the AC motor should maintain the power supply frequency phase supply voltage as the rated value; when the static rectification power supply is used The power supply shall comply with the relevant s